The front wheel axle 3UN-25181-01-00 wuth hardware on it from 2000 Yamaha TTR125 dirtbike.  It will fit 00-23

TTR 125

‍

This is a nice rear fender, 80105-341-010 that came off my 1977 Honda Cb750K vintage motorcycle. It will fit

76-78 CB750K

76-78 CB750A

76-78 CB750F Super Sport

‍

The windscreen garnish or trim 64110-MG9-870 from 1985 Honda Goldwing 1200 motorcycle.  It also includes the original OEM Honda emblem.

‍

The tail light 33701-341-910 that came off my 1978 HOnda CB750K vintage motorcycle. (This taillight has a break in the top of it but I do have another one also that is solid and sound $40 for it) -you may want this one cheaper if you just need the backing part of it or want to tape it up , but also have a perfect one too)  I also have the wiring for it or technically called the tail sub wire 32111-393-000. ($15) Also available is the license plate holder ($35)or number plate bracket 84700-393-670.  The taillight fits those right below and the license plate bracket lists the models listed further below in this ad.  

TAILLIGHT FITS

1976 CB550F A - SUPER SPORT 550 FOUR TaillightHonda Motorcycle

1976 GL1000 A - GOLD WING TaillightHonda Motorcycle

1978 CB550K A - 550 FOUR K TaillightHonda Motorcycle

1978 CB750K A - 750 FOUR K TaillightHonda Motorcycle

1977 CB550K A - 550 FOUR K TaillightHonda Motorcycle

1977 CB750K A - 750 FOUR K TaillightHonda Motorcycle

1977 CB550F A - SUPER SPORT 550 FOUR TaillightHonda Motorcycle

1976 CB750F A - 750 SUPER SPORT TaillightHonda Motorcycle

1976 CB750K A - 750 FOUR TaillightHonda Motorcycle

1977 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1977 CB400F A - SUPER SPORT 400 FOUR TaillightHonda Motorcycle

1978 GL1000 A - GOLD WING TaillightHonda Motorcycle

1978 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1978 CB750F A - 750 SUPER SPORT TaillightHonda Motorcycle

1977 CB750F A - 750 SUPER SPORT TaillightHonda Motorcycle

1977 GL1000 A - GOLD WING TaillightHonda Motorcycle

1976 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1979 CB650 A TaillightHonda Motorcycle

1976 CB550K A

LICENSE PLATE BRACKET FITSHonda Motorcycle

1978 CB550K A - 550 FOUR K TaillightHonda Motorcycle

1978 CB750K A - 750 FOUR K TaillightHonda Motorcycle

1977 CB550K A - 550 FOUR K TaillightHonda Motorcycle

1977 CB750K A - 750 FOUR K TaillightHonda Motorcycle

1977 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1978 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1976 CB750A A - 750 HONDAMATIC TaillightHonda Motorcycle

1979 CB650

‍

The tach 37250-MB1-841 or 37250-MB1-861 or guage or instrument that came off a 1984 Honda Magna 750 motorcycle.  It may fit other years as well.  It may also fit models with these part numbers.  37250MB1841

37250MB1008

37250MB1018

37250MB1028

37250MB1600

37250MB1601

37250MB1602

37250MB1603

37250MB1871

A good straight and solid side stand from 1984 Honda CX650E motorcycle. Ready to be installed.

An original OEM front fender 61000-HA0-010 from 1985 Honda Big Red 250ES ATV.   It is very solid with damage to the left mount

‍

A rear brake assembly with brake shoes, hardware, springs, mounting plate and the brake arm from a 1975 Can Am TNT 175 vintage motorcycle.  

The front fairing including the left front side cowl 641A1-MB6-671ZA and the front right side fairing 641A0-MB6-671ZA and the front centre cowl set 641A5-MB6-000ZA off 1984 Honda Interceptor 1000 VF1000F.  This is the cowl or fairing or shroud that wraps around the headlight.  The pictures just show them resting together.  They are not attached.  There is one crack in the lower section of one side as seen in the last pic. The mounting tabs are all good.

‍

A matched set of 4 rims that came off 1988 Yamaha Champ 100 ATV, 2HX-25390-00-35 and 2FJ-25180-00-35.  (Selling as a set) The fronts for sure fit other years and models such as the Grizzly and the Raptor and the Badger.  The rims are 7 inch.  Tire sizes that are presently on the rims (one holds air) are 17x7-7 and 18x7-7.  

‍

A nice complete left handlebar switch including the light switch hi low beam, the horn, the turn signal switch and all the wiring from a 1983 Honda CM450E motorcycle.  It will fit the 1982 Honda CM450C Custom as well.

‍

A good solid front fender 5X2-21511-00-00 from 1983 Yamaha YZ80 vintage motocross bike.  It also includes the mounting bracket  22W-21523-00-00.

The fender will fit 1983, 1985 YZ80.  The fender is good and solid.  It did have a crack in it but had been heat welded and other than a scar, it is very solid.  The paint is cracking on the fender but there are no cracks in the actual fender.

‍

A nice clean pair of relay arms or rear suspension swingarm  arms from 1983 Yamaha RZ350 motorcycle.

‍

The airbox from a 2000 Yamaha TTR125 dirtbike.  It includes the air case 5HP-14411-01-00 (the main part) and the other parts associated with it as in the pic.

It fits 2000 to 2004 TTR 125

‍

A nice looking windshield or OEM headlight fairing and windshield from 1984 HOnda CX650E motorcycle.  The OEM decals are on it, they are quite vibrant on one side and a little faded on the other.  The original HONDA sticker is on it as well.   As you can see in the pics there is a hairline crack in the fairing right underneath the windshield.  It was used on a bike as a daily driver the way it is.  There is also a small crack in the top part of the windshield with a little chip out of the fairing.  a little heat to "weld' it together will make it good and solid.  These are getting harder to find.

‍

The swingarm that came off 1983 Yamaha RZ 350 motorcycle.  Also available separately are the link arms or relay arms and the chain adjusters from 1983

Yamaha RZ350 motorcycle.

‍

I have a starter for sale 21163-1263 that came off 2001 Kawasaki Vulcan 800 motorcycle.  It will fit Kawasaki Motorcycle

1996 Vulcan 800 - VN800-A2

2001 W650 - EJ650-A3

2003 Vulcan 800 - VN800-A9

2007 Vulcan 900 Custom (European) - VN900C7F

2007 Vulcan 900 Classic LT - VN900D7F

2007 Vulcan 900 Custom - VN900C7F

2015 W800 (European) - EJ800AFF

2010 Vulcan 900 Classic LT - VN900DAF

2010 Vulcan 900 Classic - VN900BAF

2010 Vulcan 900 Custom - VN900CAF

2009 Vulcan 900 Classic - VN900B9F

2009 Vulcan 900 Custom - VN900C9FA

2009 Vulcan 900 Custom (European) -  

2009 Vulcan 900 Custom - VN900C9F

2009 Vulcan 900 Classic LT - VN900D9F

2012 W800 (European) - EJ800ACFA

2004 Vulcan 800 Drifter - VN800-E4

2004 Vulcan 800 Classic - VN800-B9

2000 Vulcan 800 Classic - VN800-B5

2000 Vulcan 800 Drifter - VN800-C2

2003 Vulcan 800 Classic - VN800-B8

2003 Vulcan 800 Drifter - VN800-E3

2021 W800 - EJ800DMFNN

2015 W800 (European) - EJ800AFFA

2024 W800 - EJ800DRFNN

2024 W800 - EJ800DRFNL

2004 Vulcan 800 - VN800-A10

2021 W800 - EJ800DMFNL

2008 Vulcan 900 Custom - VN900C8F

2014 W800 (European) - EJ800AEFA

2022 W800 - EJ800DNFNL

2016 W800 (European) - EJ800AGFA  

2012 W800 (European) - EJ800ACF

2014 W800 (European) - EJ800AEF

2013 W800 (European) - EJ800ADF

2006 Vulcan 900 Classic - VN900B6F  

2006 Vulcan 900 Classic LT - VN900D6F

2006 Vulcan 800 Drifter - VN800E6F

2002 Vulcan 800 - VN800-A8

2020 W800 - EJ800DLF

2005 Vulcan 800 Classic - VN800-B10

2005 Vulcan 800 - VN800-A11

2005 Vulcan 800 Drifter - VN800-E5  

2019 EJ800CKF - W800 Cafe

2001 Vulcan 800 Classic - VN800-B6

2007 Vulcan 900 Classic - VN900B7F

2001 Vulcan 800 - VN800-A7

2011 W800 (European) - EJ800ABS

1995 Vulcan 800 - VN800-A1

2000 W650 - EJ650-A2

1998 Vulcan 800 - VN800-A4

2023 W800 - EJ800DPFNL

2023 W800 - EJ800DPFN

2008 Vulcan 900 Classic LT - VN900D8F

2008 Vulcan 900 Custom (European) - VN900C8F

2008 Vulcan 900 Classic - VN900B8F

2016 W800 (European) - EJ800AGF

2013 W800 (European) - EJ800ADFA

1999 Vulcan 800 Drifter (Canada Only) - VN800-C1

1999 Vulcan 800 - VN800-A5

2002 W650 (Canada Only) - EJ650-A4

2002 Vulcan 800 Classic - VN800-B7  

2002 Vulcan 800 Drifter - VN800-E2

2022 W800 - EJ800DNFNN

2000 Vulcan 800 - VN800-A6

2020 W800 Cafe - EJ800CLF

2001 Vulcan 800 Drifter - VN800-E1

1997 Vulcan 800 Classic - VN800-B2

1997 Vulcan 800 - VN800-A3

2010 Vulcan 900 Custom - VN900CAFA  

2011 W800 (European) - EJ800ABF

1998 Vulcan 800 Classic - VN800-B3

1999 Vulcan 800 Classic - VN800-B4

1996 Vulcan 800 Classic

‍

This is the cdi or igniter or brain box 21119-1105 that came off 1982 Kawasaki KDX250 enduro bike. Also available for sale are the ignition coil 21121-1050 and the cap 21130-1006. The number on the cdi is 21119 1019 CU1517 The cdi will fit those listed below.  The coil will fit the 81-82 KDX 250. Kawasaki Motorcycle

1983 KDX250 - KDX250-B3 IgnitionKawasaki Motorcycle 1984 KDX250 - KDX250-B4 IgnitionKawasaki Motorcycle

1982 KDX250 - KDX250-B2 IgnitionKawasaki Motorcycle 1981 KDX250 - KDX250-B1 IgnitionKawasaki Motorcycle

1982 KDX250 - KDX250-B2 IGNITION/GENERATORKawasaki Motorcycle 1981 KDX250 - Kawasaki Motorcycle

1982 KDX250 - KDX250-B2 IGNITION/GENERATORKawasaki Motorcycle 1981 KDX250

A nice set of chrome handlebar grips that will fit any 7/8 inch handlebars. A great opportunity to dress up your bike.  

These are really sharp with chrome with black insets.

‍

The swingarm from 1999 Honda CBR600 motorcycle. Also selling separately are the chain adjusters 40543-MAS-000 ($20) and the rear shock mount or shock bracket or swing arm bracket 52475-MAS-E00. ($35) It fits

99-06 CBR600

99 CBR900

The swingarm will fit the 2000 model as well and the chain adjusters will fit

97, 99 CBR900

97, 00-01, 02-03 CBR1100XX Blackbird

98-03 Shadow ACE VT750

99,01, 04-06 CBR600

99-00 VTR1000 Super Hawk

01 VT750 Shadow Deluxe

01, 03, 05-07  VT750 Shadow Spirit

02, 04, 05 CB900F 919

‍

The tool pouch or tool kit from a 198 Kawasaki Ninja ZX600 motorcycle.  These are the tools included.  This pouch is the same kit as found in the ZZR model from 03-05 and the 96, 97, 02 Ninja . You can add your own tools to the pouch that you specifically like as well.

‍

Good working seat latch from 1983 yamaha RZ350 vintage motorcycle.

‍

A real nice metallic blue rear fender 33720-MG9-771 from 1985 Honda Goldwing 1200 motorcycle.  Also available separately is the license plate bracket 84700-MG9-770 and the license plate light 33720-MG9-771

‍

This is an excellent seat from 1991 Yamaha Banshee 350 ATV 3GG-24710-10-00.  It will fit

87-06 Banshee.  It also includes the seat lever 3GD-24776-00-00 worth approx. $55 new.

‍

This muffler16G-14711-01-00 looks excellent on the outside edge, the inside has been degreased etc from road dirt.  There is one small dime size hole on inside edge which easily can be brazed

‍

Real nice trunk light or taillight or brake light or light bar from 1985 Honda Goldwing 1200 Interstate motorcycle.  It is in excellent condition other than a crack on the left end.  There is a crack that you can feel with your fingernail but all the visible taillights are intact.  On the inside, the light has 2 layers of lense.  The inner lens has a tiny piece broke out which does not affect anything at all.

‍

The swingarm or rear arm 3GD-22110-20-P0 from a 2003 Yamaha Warrior ATV.  The bushing inside the arm is there and the seal guards 2GU-22151-00-00.  (the hardware alone new costs about $150).  It will fit 91-04 Warrior Also available is the connecting rod or the swingarm rod, 1UY-2217F-00-00.  It fits 89-04 Warrior 350. 

‍

‍

The seat 5HP-24770-00-00 from 2000 Yamaha TTR125 dirtbike.  As you can see the cover isn't perfect but the foam and seat pan is in great shape.  It should fit many other years.

‍

The swingarm or rear arm 3GD-22110-20-P0 from a 2003 Yamaha Warrior ATV.  The bushing inside the arm is there and the seal guards 2GU-22151-00-00.  (the hardware alone new costs about $150).  It will fit

91-04 Warrior

Also available is the connecting rod or the swingarm rod, 1UY-2217F-00-00.  It fits 89-04 Warrior 350

The swingarm is good and solid.  It could use some paint from the discoloriation in spots but otherwise it is very good.

‍

A good clutch perch with clutch lever from a 1983 Honda Goldwing 1100 motorcycle, GL1100.  Also available separate;y is the brake master cylinder.

‍

An excellent clean gas tank cover or console 44270-19B00 from 1990 Suzuki Quadrunner  4x4 250 ATV.  It will fit

89-91 LT-4WD QuadRunner 250

‍

The rear wheel hub from 1983 Yamaha RZ350 motorcycle. The sprocket can be sold separately.

The rubber hub inserts are also included with the hub.

This is a complete rear shock with damper and spring from a 1983 Yamaha RZ350 motorcycle.

‍

The rear shock adjuster 29Y2690 - M521 with the rubber belt off a 1983 Yamaha RZ350 motorcycle.  It is used to set the preload of the shock for the perfect ride.  The belt connects the remote adjuster to the shock spring allowing for easy adjustment of the preload.

‍

A good solid swingarm 5HP-22110-00-00 from 2000 Yamaha TTR125 dirtbike,.  Also available is the chain guard or technically called the chain case 5HP-22311-00-00 and the relay arm or the suspension linkage  39K-2217A-00-00. The connecting rod 1 is attached to the relay arm as well 22W-2217F-00-00. The swingarm will fit

00, 01, 03, 04 TTR125

The relay arm will fit 84-92 YZ80 except for 87,88. and if fits these years of the TTR125

00, 01, 03, 04

‍

The shift lever plate that houses the gear shifters 57940-20B00 from a 1990 Suzuki Quadrunner 250 ATV.  It also has the shift lever pivot spacers 09180-08139 and the shift lever pivot bolts  09180-08139 and the reverse lever 57970-19B01 and the transmission shift lever.  If you're having difficulty with the functioning of changing your gears then you may need this item. The shift lever plate will fit 1988-2001 Quadrunner 250

‍

1990 Suzuki Quadrunner 250 LTF250m ATV.  It is straight just about everywhere other than a little bend in the front rail.  This part(if you're missing it) sure makes lots of jobs a whole lot easier.

Fitment is below

89-91 Quadrunner 250

94-95, 97-98 Quadrunner 250

92-93,95,97 King Quad 300

96 King Quad 250

‍

An excellent solid set of left and right exhaust pipes or header pipes or technically called the muffler body 18350-MG9-003 from 1993 Honda Goldwing 1500 motorcycle. ,Being sold  per side or can be sold together.  Also available are the  18325-MG9-003 pipe protector ($50) and chamber protector ($50)or heat shields.

‍

This is a nice vibrant rear fender 80100-MG9-770ZC in Pearl Saturn Red from 1984 Honda Goldwing 1200 motorcycle.  The paint is excellent and would make your bike look amazing.  It will fit from 84-87 GL1200 models.  Also available is the light license plate assembly in chrome 33720-MG9-771 ($40) and the number plate bracket in chrome as well. ($30)  Also available is the rear sub wiring harness for license plate light  32109-MG9-770 ($20).

‍

The chrome rear trunk stay or rear rack 84101-MG9-770 from 1984 Honda Goldwing 1200 motorcycle.  Also available is the antenna stay 39159-MG9-870 ($45) and the antenna cable wiring ($20).The antenna stay will fit 84-87 Goldwing 1200 models.

Fitment for the rack is below

a Motorcycle 1985 GL1200A AC - GOLD WING ASPENCADE

Honda Motorcycle 1985 GL1200A A - GOLD WING ASPENCADE

Honda Motorcycle 1985 GL1200I AC - GOLD WING INTERSTATE

Honda Motorcycle 1985 GL1200I A - GOLD WING INTERSTATE

Honda Motorcycle 1984 GL1200I A - GOLD WING INTERSTATE

Honda Motorcycle 1984 GL1200A A - GOLD WING ASPENCADE

Honda Motorcycle 1984 GL1200I AC - GOLD WING INTERSTATE

Honda Motorcycle 1984 GL1200A AC - GOLD WING ASPENCADE

‍

The rear brake pedal 5HP-27200-00-00 from 2000 Yamaha TTR125 dirtbike. It will fit

00, 01, 03, 04 TTR125

Also available is the brake rod 5HP-27231-00-00. ($20). It will fit the same years,

‍

A good solid vintage rear fender and the mounting bracket is available for sale as well 80105KF9000 from a 1986 Honda XL186S enduro bike. The fender will most likely fit other years but I don't have a part number for it. The mounting bracket fitment is below
   XL125SC 1983 (D) GENERAL EXPORT / KPH
   XL125SC 1983 (D) GENERAL EXPORT / KPH
   XL125SC 1987 (H) FRANCE / KPH
   XL125SC 1987 (H) FRANCE / KPH
   XL125SC 1987 (H) FRANCE / KPH
   XL125SL-DK 1990 (L) GENERAL EXPORT / KPH
   XL125S 1987 (H) FRANCE / KPH
   XL125SLD 1990 (L) GENERAL EXPORT / KPH
   XL185S 1987 (H) CANADA
   XL185S 1990 (L) GENERAL EXPORT / KPH
   XL185S 1990 (L) AUSTRALIA
   XL185S 1991 (M) AUSTRALIA
   XL185S 1992 (N) SINGAPORE
   XL185S 1993 (P) GENERAL EXPORT / KPH
   XL185S 1993 (P) SINGAPORE
   XL185S 1993 (P) AUSTRALIA
   XL185S 1983 (D) CANADA
   XL185S 1984 (E) CANADA
   XL125S 1983 (D) GENERAL EXPORT / KPH
   XL125S 1985 (F) FRANCE / KPH
   XL185S 1985 (F) CANADA
   XL185S 1986 (G) CANADA
   XL125S 1983 (D) GENERAL EXPORT / KPH
   XL125S 1983 (D) GENERAL EXPORT / KPH
   XL125S 1987 (H) FRANCE / KPH
   XL125S 1987 (H) FRANCE / KPH
   XL125S 1987 (H) FRANCE / KPH
   XL125SLD 1990 (L) GENERAL EXPORT / KPH
   XL185S 1983 (D) USA
   XL125S 1984 (E) USA

‍

The fender, from 1985 HOnda Goldwing 1200 Limited Edition motorcycle  61100-MG9-950ZA is good and solid with no breaks in it.  As you can see, the paint is damaged at the very front.  It got pushed on the front portion of the bumper and crimped the paint but the fender is still very solid.

‍

The engine mount or engine stay or technically called the engine stay 3, 5HP-21316-00-00 from 2000 Yamaha TTR125.  It will fit

00, 02, 03, 04 TTR125

‍

This tail section is in real nice condition with only a few minor scuffs and scratches. It is solid with no cracks and all mount tabs are good. From 1983

Suzuki GS400 motorcycle. It should fit other years and probably the Suzuki GS450 as well.

A front brake disc or brake rotor from 1986 Honda 250R ATC,

‍

A good rear brake disc or brake rotor

5FC-25449-20-00 with mounting hardware from 2000 Yamahah TTR125 dirtbike.  It will fit

2000-2001 TTR125

‍

A good solid set of handlebars 5HP-26111-00-00 from 2000 Yamaha TTR125 dirtbike.  They have the typical scratch here and there from usage. They will fit

00,02, 03, 04 TTR125

‍

A good solid and straight side stand  5HP-27311-00-00 from 2000 Yamaha TTR 125 dirtbike.  It will fit

00,01, 03,04 TTR125

‍

A nice rear shock 5HP-22210-01-00 from 2000 Yamaha TTR125 dirtbike.  Fitment is below

00, 01, 03, 04 TTR125

‍

A real nice rear fender 4ES-21611-10-00 from 2000 Yamaha TTR125 dirtbike.  Fitment is below

98, 2000 YZ80

00-06 TTR125

‍

The master cylinder with clutch lever 22880-MB2-673 from 1994 Honda Interceptor 1000 VF1000F motorcycle.  It also fits the same year Interceptor 750. VF750F.

‍

A good solid carburetor joint or intake joint or carb boot from 2000 Yamaha TTR125 dirtbike.  Fitment is from

2000-2004 TTR 125 models

‍

A throttle grip assembly or twist grip assembly including the throttle tube 434-26243-00-00, the grip  1LX-26242-01-00, and the cap grips

The throttle tube will fit

00-04 TTR125

90, 92, 94-96, 98, 00 RT100

96-97 RT180

85-86 BW200

74-75, 79, 81 DT175

74,,77, 78 DT250

76-78, 80 YZ80

80 YZ50

83 RX50

‍

The rear brake panel from 1974 Honda CB350F.  Selling the brake panel or backing plate 43100-369-010,  the brake shoes and springs ,the rear brake arm 43410-286-000 (fits the CB200 as well), the brake panel stopper bolt ($75).  Also have the rear wheel axle 42301-286-010 and the adjusters etc. The part numbers for teh wheel axle match up with the CJ360 as well.

A good straight rear wheel axle 42301-286-010 from 1974 Honda CB350F motorcycle.  The part numbers line up with the CB360 as well. All the other parts in the photo are being sold separately,

‍

The conduction assembly 47X1259001 including the rad cap 22W1246200 and hose 29L1248500 from 1983 Yamaha RZ350 motorcycle. $75 for the complete assembly

‍

This is a good rear shock or rear suspension or rear cushion 52400MG0003 from 1983 HOnda CS650E motorcycle.

‍

The single seat from 1985 Yamaha Maxim X 750. The seat pan is good, the foam is good and the seat bracket and lever are also for sale 1AA-24776-00-00 and 1AA-24728-00-00 (they're $40 as a set)

‍

An excellent brake light or tail light complete with wiring from 1983 Suzuki GS400 motorycle.  It will fit from 78-83.  It may also fit the GS450 model.

‍

A good solid, left signal light or winker or flasher 33450MG0720 from 1983 Honda CX650E motorcycle.  It has a good casing and the lens and wiring is good as well.

‍

A nice matched pair of original OEM HOnda mirrors from 1983 Honda CX650E motorccycle. The glass is clear and undamaged, the arms are undamaged and the back is clean with a few light scratches (not from being laid down).   Fitment is below

CB1100F SUPER SPORT 1983 (D) USA

XLV750R 1983 (D)

CX500E 1982 (C)

CB1100F 1983 (D) ITALY

CB750F 1983 (D) SOUTH AFRICA

CX650E 1983 (D) AUSTRIA

CX650E 1983 (D) CANADA

CX650E 1983 (D) EUROPEAN DIRECT SALES

CX650E 1983 (D) GERMANY

CX650E 1983 (D) GERMANY / TYPE 2

CX650E 1983 (D) ITALY

CX650E 1983 (D) NORTH EUROPE

CX650E 1983 (D) SOUTH AFRICA

CX650E 1983 (D) SWEDEN

CX650E 1983 (D) SWITZERLAND

‍

A nice brake pedal with spring included from 1983 Yamaha RZ350 motorccycle.  It should fit all years of the RZ350

‍

A nice matched set of rear shocks or rear cushion 52400437712 from 1986 Honda XL185S endurio bike.  They include the compression springs as well.  Fitment is below.

XL125SC 1983 (D) GENERAL EXPORT / KPH

XL125SC 1983 (D) GENERAL EXPORT / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SL-DK 1990 (L) GENERAL EXPORT / KPH

XL185FM 1982 (C) NEW ZEALAND

XL185S 1980 (A) CANADA

XL185S 1981 (B) CANADA

XL185S 1982 (C) CANADA

XL185S 1983 (D) CANADA

XL185S 1984 (E) CANADA

XL185S 1979 (Z) CANADA

XL200FM 1983 (D) NEW ZEALAND

XL125S 1980 (A) BELGIUM / KPH

XL125S 1980 (A) CANADA / CSW KPH

XL125S 1980 (A) ENGLAND / MPH

XL125S 1980 (A) FRANCE / KPH

XL125S 1980 (A) SWEDEN / KPH

XL125S 1981 (B) BELGIUM / KPH

XL125S 1981 (B) CANADA / KPH

XL125S 1981 (B) GENERAL EXPORT / KPH

XL125S 1981 (B) GENERAL EXPORT / MPH

XL125S 1981 (B) ENGLAND / MPH

XL125S 1981 (B) EUROPEAN DIRECT SALES / KPH

XL125S 1981 (B) FRANCE / KPH

XL125S 1981 (B) SOUTH AFRICA / KPH

XL125S 1981 (B) SWEDEN / KPH

XL125S 1981 (B) SWITZERLAND / KPH

XL125S 1981 (B) AUSTRALIA / KPH

XL125S 1982 (C) CANADA / KPH

XL125S 1982 (C) GENERAL EXPORT / KPH

XL125S 1982 (C) GENERAL EXPORT / MPH

XL125S 1982 (C) ENGLAND / MPH

XL125S 1982 (C) EUROPEAN DIRECT SALES / KPH

XL125S 1982 (C) FRANCE / KPH

XL125S 1982 (C) PARAGUAY / KPH

XL125S 1982 (C) SOUTH AFRICA / KPH

XL125S 1982 (C) SWITZERLAND / KPH

XL125S 1982 (C) AUSTRALIA / KPH

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1983 (D) SOUTH AFRICA / KPH

XL125S 1979 (Z) GENERAL EXPORT / KPH

XL125S 1979 (Z) GENERAL EXPORT / MPH

XL125S 1979 (Z) SOUTH AFRICA / KPH

XL125S 1979 (Z) AUSTRALIA / KPH

XL185S 1985 (F) CANADA

XL185S 1986 (G) CANADA

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1987 (H) FRANCE / KPH

XL125S 1987 (H) FRANCE / KPH

XL125S 1987 (H) FRANCE / KPH

XL125SLD 1990 (L) GENERAL EXPORT / KPH

XL125S 1980 (A) USA

XL125S 1981 (B) USA

XL125S 1982 (C) USA

XL185S 1980 (A) USA

XL185S 1981 (B) USA

XL185S 1982 (C) USA

XL185S 1983 (D) USA

XL125S 1984 (E) USA

‍

A good solid rad that came off 1987 Yamaha Rz 350 motorcycle.

The top fork bridge or clamp or top triple tree for sale 53230-HA2-000 that came off Honda 250R ,

‍

NOS K & N air filter for the YFM400 Kodiak 400 from 2000-2002.  Comes with installation instructions as well. These are the benefits of a K & N air filter

Designed to provide increased horsepower and acceleration

Specifically developed for Off-Road, Motocross, ATVs, UTVs and Side by Sides

Pleated cotton media provides a large filtration area offering low restriction, high-capacity and long service intervals

Multiple layers of woven cotton gauze media offers excellent filtration

Fits directly into OEM air box with application specific sealing bead ensuring a precise fit

No fuel management modifications are required to obtain increased performance

Washable & reusable, most are pre-oiled and ready to ride

‍

All 4 intake manifolds (which can be sold separately), 17110-431-010 and 17120-431-010 from 1983 Honda Goldwing 1100 motorcycle.  They are in good solid condition.  Fitment is below

1979 Goldwing 1000

1980-83 Goldwing 1100

‍

‍

A coolant reservoir from 1983 Yamaha RZ350 vintage motorcycle.

‍

A good solid straight swingarm from a 1983 Yamaha RZ350 vintage motorcycle.  It has the cable guide on it.  Also available for sale separately is the swing arm bolt or pivot shaft bolt. It needs a good cleaning and some new paint if you want to make it look new again,

‍

The rad 17700-14110 and rad cap 17730-14300 from 1983 Suzuki RM 125 vintage motocross bike.  The rad cap can be sold separately but not until the rad has sold.  The rad will fit the 82-83 RM125

A good straight and solid frame from a 1983 Yamaha YZ125 vintage motocross bike.  It may fit the 1984 model as well and perhaps others.  The footpegs are being sold separately

‍

Two front brake rotors or brake discs 45120-MB9-950 from 1983 HOnda Goldwing 1100 motorcycle.  They are available separately at $80 ea.

‍

A cdi 5X2-85540-10-00 from 1983 Yamaha YZ80 vintage motocross bike.  The number on the part is TlA01-26A

5X2-10.  Fitment is below.

82-83 YZ60

83 YZ100.

‍

A real nice looking front fender from 1985 Suzuki GS400 motorcycle.  It should fot other years and probably the GS450 as well. It is a good solid fender. The mounts aren't perfect but they held the fender on the bike properly

‍

A good solid oil tank 4VP-F1751-00-00 from a 2003 Zuma 50 BWS 50 scooter. Also available is the oil cap ( 3BN-21770-01-00) and the oil tank breather hose 4VP-F1745-00-00 and the oil sub tank holder 4VP-F1734-00-00 and the oil sub tank 5PJ-F1733-00-00. The complete assembly is $35

The tank and hose and sub tank and sub tank holder will fit

03-09 YW50

The oil cap will fit those listed below

03-09 Zuma 50

1990 Snoscoot

02-03 Vino 50 YJ50

‍

A real nice looking, solid straight rear chrome fender 80100-405-000 from 1978 HOnda CB750K motorcycle.  It will fit the 1977 Hoda CB750K as well.  The chrome is quite clean on the viewable part of the fender.  The under side of it has surface rust on it where a quick sanding of it would remove a good portion of it.  It is just on the surface and not through at all.  Plus, it's in a spot where you don't notice it.

‍

A good solid front fender 35004-1233-6W from 1982 KDX175 dirtbike.  It needs a good cleaning as you can see.  The process to get rid of the oxidization was started and you can see how it brightens it up.  Just needs more elbow grease.  It will fit

80-82 KDX175

80-83, 87, 90-91 KX125

80 KX420

81 KDX420

82-84, 87, 92 KX250,

82-84 KDX 250

83 KDX200

84,89-90 KX500

‍

A good solid side cover 83700-443-6100 from a 1980 Honda Hawk . It is not broken and ready to be installed.  All tabs are secure.    It will fit from 1980-1982

‍

A good solid, straight front engine hanger from a 1983 HOnda XR200 vintage bike.

‍

A good solid rear fender 80101-MG9-000 from 1984 Honda Goldwing 1200 motorcycle.  Fitment is below

84-87 Goldwing 1200

‍

A good brake light or tail light assembly from 1987 Yamaha RZ350 motorcycle.  The lens and housing is good and the wiring is good.

‍

‍

A matched set of rear shocks with chrome springs from 1984 HOnda Magna 750 motorcycle, 52400-MB1-871 and 52500-MB1-871. Sold as a pair.

‍

A nice, straight side stand or kick stand from a 1983 Yamaha RZ350 vintage motorcycle.  Also available is the return spring

‍

The OEM ignition coil from 1983 Yamaha RZ350 motorcycle.  There are 2 available.  they will fit the Yamaha RD350 as well.

‍

A swingarm for sale that came off 1983 Yamaha RZ 350 motorcycle.  Also available are the wishbones and the chain adjusters

The master cylinder for sale 43015-1511 which includes the handlebar perch for it that came off 2001 Kawasaki Vulcan 800 Classic motorcycle.  Also available for sale separately is the brake calipre and brake hose 43095-1116 or brake line for sale.  

The master will fit Kawasaki Motorcycle 1993 Vulcan 88 - VN1500-A7

Kawasaki Motorcycle 1997 Vulcan 1500 - VN1500-A11

Kawasaki Motorcycle 1997 Vulcan 1500 L - VN1500-C4

Kawasaki Motorcycle 2000 Vulcan 800 - VN800-A6

Kawasaki Motorcycle 2002 Vulcan 800 - VN800-A8

Kawasaki Motorcycle 2001 Vulcan 500 LTD - EN500-C6

Kawasaki Motorcycle 2002 Vulcan 500 LTD - EN500-C7

Kawasaki Motorcycle 1998 Vulcan 800 Classic - VN800-B3

Kawasaki Motorcycle 1994 Vulcan 500 - EN500-A5

Kawasaki Motorcycle 1995 Vulcan 88 - VN1500-A9

Kawasaki Motorcycle 1996 Vulcan 500 LTD - EN500-C1

Kawasaki Motorcycle 1996 Vulcan 500 - EN500-A7

Kawasaki Motorcycle 1997 Vulcan 800 - VN800-A3

Kawasaki Motorcycle 1996 Vulcan 1500 - VN1500-A10

Kawasaki Motorcycle 1996 Vulcan 800 - VN800-A2

Kawasaki Motorcycle 1995 Vulcan 500 - EN500-A6

Kawasaki Motorcycle 1995 Vulcan 800 - VN800-A1

Kawasaki Motorcycle 2002 Vulcan 800 Classic - VN800-B7

Kawasaki Motorcycle 1992 Vulcan 88 - VN1500-A6

Kawasaki Motorcycle 1996 Vulcan 1500 L - VN1500-C3

Kawasaki Motorcycle 1993 Vulcan 500 - EN500-A4

Kawasaki Motorcycle 2003 Vulcan 800 - VN800-A9

Kawasaki Motorcycle 2003 Vulcan 500 LTD - EN500-C8

Kawasaki Motorcycle 2000 Vulcan 800 Classic - VN800-B5

Kawasaki Motorcycle 1998 Vulcan 800 - VN800-A4

Kawasaki Motorcycle 1999 Vulcan 1500 - VN1500-A13

Kawasaki Motorcycle 1999 Vulcan 500 LTD - EN500-C4

Kawasaki Motorcycle 1994 Vulcan 88 - VN1500-A8

Kawasaki Motorcycle 1999 Vulcan 800 - VN800-A5

Kawasaki Motorcycle 1999 Vulcan 800 Classic - VN800-B4

Kawasaki Motorcycle 1996 Vulcan 800 Classic - VN800-B1

Kawasaki Motorcycle 1992 Vulcan 500 - EN500-A3

Kawasaki Motorcycle 2000 Vulcan 500 LTD - EN500-C5

Kawasaki Motorcycle 2003 Vulcan 800 Classic - VN800-B8

Kawasaki Motorcycle 1998 Vulcan 1500 - VN1500-A12

Kawasaki Motorcycle 1998 Vulcan 500 LTD - EN500-C3

Kawasaki Motorcycle 2001 Vulcan 800 - VN800-A7

Kawasaki Motorcycle 2001 Vulcan 800 Classic - VN800-B6

Kawasaki Motorcycle 1997 Vulcan 800 Classic - VN800-B2

Kawasaki Motorcycle 1997 Vulcan 500 LTD

‍

This is the front brake panel assembly including the backing plate, 54510-19B20, the wheel cylinder assembly 54540-19B10 (the wheel cylinders fits up to 2002 including the King Quad 300), the brake strut assembly 54550-19B10 (new approx. $100 side) and the brake shoes 54400-19830, the various springs and hardware 54532-19B01, 53245-82031, 53244-82031, 54531-19B01, 54531-19B01, 54824-56B00, 54524-56B00 (the hardware alone is worth approx. $65 new per side).  Selling each complete side for $150. The backing plate will fit

89-00 LTF Quadrunner 250

89-91, 95-99  Quadrunner 250 4X4

‍

The ignition coil 30500-KA2-000 from 1983 Honda XR200 bike.  It will fit these models for sure and perhaps others as well.

81-83 XR200R

81-82 XR250R

‍

The cdi 30400-437-023 or from 1983 Honda XR 200 bike. (selling it for $80).It should fit all these models listed below. I also have the base electric plate 50301-KA2-000 (it fits 81-83 XR200- selling it for $15).

79-81,84 XL125S

79-81,83 XL185S

79 XR185

80-83 XR200

81-82 CB125S

‍

The ignition coil 1UY-82310-41-00 from 1983 Yamaha Tri Moto 200 ATC. Fitment is below

83-85 Tri Moto 200

83-84 Yamahauler

84-85 Tri Moto 225

85-87,89 Moto 4 200

86-88 Moto 4 225

87-88 Moto 4 350

87-88 Big Bear 350 4x4

91 YFM 250 Moto 4

99-02,04 TTR250

03 TTR225

‍

A matched set of coils from 1983 Suzuki GS400 motorcycle. ($35 ea). They will fit the 82 and 83 for sure and I believe the GS450 as well.  Also for sale are the spark plug caps ($15 pr)

‍

A pair of nice straight floorboards or technically called the step holder assembly, both left and right 50740-MT8-000 and 50730-MT8-000.  (selling the pair of floorboards for $90)They will fit other years of the Honda Goldqing 1500.  Also available are the floorboard mounts or holders or technically called the pillion step holder cover which are chrome colored, 50817-MW5-000 and 50717-MW5-000.  The right one has a piece broke off it.  Take the 2 of these for the price of one. (45)

‍

The shift shaft or gear selector 41Y-18111-00-00 from 1982 Yamaha Seca 650 turbo motorcycle.  It will also fit the non turbo model of  1982 Seca 650.  It includes the linkage assembly as well such as the shift pedal arm 4BB-18112-00-00, the shift rod 16G-18115-00-00, the 2 dust covers 2H9-18154-00-00 and other hardware. (The complete assembly with all hardware and linkages is $80).

‍

This is the 12V plug or accessory plug on the console of a 2000 Polaris Touring 600 snowmobile.  Fitment is below.

99 Classic Touring

99 Ranger 500

99 Ranger 6x6 500

99 XLT Touring

00 600 Touring

00 Classic Touring

01 500 Classic Touring

01 600 Classic Touring

‍

The front brake disc or brake rotor 45120-392-000 from 1978 HOnda CB750K vintage motorcycle.   Fitment is below

76 Honda CB750F Super Sport

77 CB750A Automatic

77 CB750K

‍

I have the front wheel or rim for sale, including the wheel hub 44601-405-000,  a 19 inch chrome spoked wheel that came off my 1978 HOnda CB750K vintage motorcycle. (Selling for $180) I also have the front brake rotor or disc. ($80) The front rim 44701-300-013 or 44701-405-771 should fit

Honda Motorcycle 1978 CB750K A - 750 FOUR K

Honda Motorcycle 1977 CB750K A - 750 FOUR K

Honda Motorcycle Models with no year CB500 A

Honda Motorcycle Models with no year CB450K6 A

Honda Motorcycle Models with no year CB450K7 A

Honda Motorcycle Models with no year CB750K A

Honda Motorcycle Models with no year CB750K3 A

Honda Motorcycle Models with no year CB450K4 A

Honda Motorcycle Models with no year CB750K2 A

Honda Motorcycle Models with no year CB750K5 A

Honda Motorcycle Models with no year CB450K5 A FRONT WHEEL

Honda Motorcycle Models with no year CB500K1 A

Honda Motorcycle Models with no year CB500K2 A

Honda Motorcycle Models with no year CB750K1 A

Honda Motorcycle Models with no year CB750K4 A

Honda Motorcycle Models with no year CB450K3 A

Honda Motorcycle Models with no year CB550 A

Honda Motorcycle Models with no year CB550K1 A

Honda Motorcycle 1976 CB550K A - 550 FOUR

Honda Motorcycle 1976 CB500T A - 500 TWIN DOHC

Honda Motorcycle 1977 CB550K A - 550 FOUR K

Honda Motorcycle 1977 CB550F A - SUPER SPORT 550 FOUR

Honda Motorcycle 1976 CB750F A - 750 SUPER SPORT

Honda Motorcycle 1978 CB550K A - 550 FOUR K

Honda Motorcycle 1976 CB750K A - 750 FOUR

Honda Motorcycle 1976 CB550F A - SUPER SPORT 550 FOUR

‍

A real nice light switch or light dimmer switch and handlebar perch from a Skidoo Blizzard 5500 snowmobile. (Selling perch and switch for $65). It should fit lots of years and other models as well.  Also for sale is the brake lever ($10)

‍

A good solid intact tachometer 515175340 from 2000 Skidoo Formula Deluxe 700 snowmobile.  Also available and being solde separately is the case holder or the tach mounting bracket 415099800. ($10).The tach

FITS MANY MODELS INCLUDING:

2000-2003 MACH Z

2000 MACH 1 R + MACH Z R Millennium edition

2000-2002  MXZ LC MODELS

2000-2002  SUMMIT LC MODELS

2000-2001  GRAND TOURING LC TWIN CYLINDER MODELS

2000 FORMULA Z

2000 FORMULA III

2000 FORMULA 500 LC

2000-2001  FORMULA DELUXE LC MODELS

‍

The front main engine guard or skid plate that was on my 1995 Yamaha Big Bear 350 ATV 2HR-2147A-00-00.  It will fit

Yamaha ATV 1993 BIG BEAR 4WD

Yamaha ATV 1989 BIG BEAR 4WD

Yamaha ATV 1990 BIG BEAR 4WD

Yamaha ATV 1995 BIG BEAR 4WD

Yamaha ATV 1991 BIG BEAR 4WD

Yamaha ATV 1993 BIG BEAR 4WD (ME & NH Only)

Yamaha ATV 1992 BIG BEAR 4WD -

Yamaha ATV 1998 BIG BEAR 2WD

Yamaha ATV 1997 BIG BEAR 4WD -

Yamaha ATV 1996 BIG BEAR 2WD

Yamaha ATV 1998 KODIAK 4WD

Yamaha ATV 1987 BIG BEAR 4WD

Yamaha ATV 1988 BIG BEAR 4WD

Yamaha ATV 1997 BIG BEAR 2WD

Yamaha ATV 1996 BIG BEAR 2WD -

Yamaha ATV 1994 BIG BEAR 4WD

Yamaha ATV 1991 BIG BEAR

Yamaha ATV 1997 BIG BEAR 2WD

Yamaha ATV 1996 BIG BEAR 4WD

Yamaha ATV 1996 KODIAK 4WD

‍