A nice rear shock 5HP-22210-01-00 from 2000 Yamaha TTR125 dirtbike.  Fitment is below

00, 01, 03, 04 TTR125

‍

A real nice rear fender 4ES-21611-10-00 from 2000 Yamaha TTR125 dirtbike.  Fitment is below

98, 2000 YZ80

00-06 TTR125

‍

The master cylinder with clutch lever 22880-MB2-673 from 1994 Honda Interceptor 1000 VF1000F motorcycle.  It also fits the same year Interceptor 750. VF750F.

‍

A good solid carburetor joint or intake joint or carb boot from 2000 Yamaha TTR125 dirtbike.  Fitment is from

2000-2004 TTR 125 models

‍

A throttle grip assembly or twist grip assembly including the throttle tube 434-26243-00-00, the grip  1LX-26242-01-00, and the cap grips

The throttle tube will fit

00-04 TTR125

90, 92, 94-96, 98, 00 RT100

96-97 RT180

85-86 BW200

74-75, 79, 81 DT175

74,,77, 78 DT250

76-78, 80 YZ80

80 YZ50

83 RX50

‍

The rear brake panel from 1974 Honda CB350F.  Selling the brake panel or backing plate 43100-369-010,  the brake shoes and springs ,the rear brake arm 43410-286-000 (fits the CB200 as well), the brake panel stopper bolt ($75).  Also have the rear wheel axle 42301-286-010 and the adjusters etc. The part numbers for teh wheel axle match up with the CJ360 as well.

A good straight rear wheel axle 42301-286-010 from 1974 Honda CB350F motorcycle.  The part numbers line up with the CB360 as well. All the other parts in the photo are being sold separately,

‍

The conduction assembly 47X1259001 including the rad cap 22W1246200 and hose 29L1248500 from 1983 Yamaha RZ350 motorcycle. $75 for the complete assembly

‍

This is a good rear shock or rear suspension or rear cushion 52400MG0003 from 1983 HOnda CS650E motorcycle.

‍

The single seat from 1985 Yamaha Maxim X 750. The seat pan is good, the foam is good and the seat bracket and lever are also for sale 1AA-24776-00-00 and 1AA-24728-00-00 (they're $40 as a set)

‍

An excellent brake light or tail light complete with wiring from 1983 Suzuki GS400 motorycle.  It will fit from 78-83.  It may also fit the GS450 model.

‍

A good solid, left signal light or winker or flasher 33450MG0720 from 1983 Honda CX650E motorcycle.  It has a good casing and the lens and wiring is good as well.

‍

A nice matched pair of original OEM HOnda mirrors from 1983 Honda CX650E motorccycle. The glass is clear and undamaged, the arms are undamaged and the back is clean with a few light scratches (not from being laid down).   Fitment is below

CB1100F SUPER SPORT 1983 (D) USA

XLV750R 1983 (D)

CX500E 1982 (C)

CB1100F 1983 (D) ITALY

CB750F 1983 (D) SOUTH AFRICA

CX650E 1983 (D) AUSTRIA

CX650E 1983 (D) CANADA

CX650E 1983 (D) EUROPEAN DIRECT SALES

CX650E 1983 (D) GERMANY

CX650E 1983 (D) GERMANY / TYPE 2

CX650E 1983 (D) ITALY

CX650E 1983 (D) NORTH EUROPE

CX650E 1983 (D) SOUTH AFRICA

CX650E 1983 (D) SWEDEN

CX650E 1983 (D) SWITZERLAND

‍

A nice brake pedal with spring included from 1983 Yamaha RZ350 motorccycle.  It should fit all years of the RZ350

‍

A nice matched set of rear shocks or rear cushion 52400437712 from 1986 Honda XL185S endurio bike.  They include the compression springs as well.  Fitment is below.

XL125SC 1983 (D) GENERAL EXPORT / KPH

XL125SC 1983 (D) GENERAL EXPORT / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SC 1987 (H) FRANCE / KPH

XL125SL-DK 1990 (L) GENERAL EXPORT / KPH

XL185FM 1982 (C) NEW ZEALAND

XL185S 1980 (A) CANADA

XL185S 1981 (B) CANADA

XL185S 1982 (C) CANADA

XL185S 1983 (D) CANADA

XL185S 1984 (E) CANADA

XL185S 1979 (Z) CANADA

XL200FM 1983 (D) NEW ZEALAND

XL125S 1980 (A) BELGIUM / KPH

XL125S 1980 (A) CANADA / CSW KPH

XL125S 1980 (A) ENGLAND / MPH

XL125S 1980 (A) FRANCE / KPH

XL125S 1980 (A) SWEDEN / KPH

XL125S 1981 (B) BELGIUM / KPH

XL125S 1981 (B) CANADA / KPH

XL125S 1981 (B) GENERAL EXPORT / KPH

XL125S 1981 (B) GENERAL EXPORT / MPH

XL125S 1981 (B) ENGLAND / MPH

XL125S 1981 (B) EUROPEAN DIRECT SALES / KPH

XL125S 1981 (B) FRANCE / KPH

XL125S 1981 (B) SOUTH AFRICA / KPH

XL125S 1981 (B) SWEDEN / KPH

XL125S 1981 (B) SWITZERLAND / KPH

XL125S 1981 (B) AUSTRALIA / KPH

XL125S 1982 (C) CANADA / KPH

XL125S 1982 (C) GENERAL EXPORT / KPH

XL125S 1982 (C) GENERAL EXPORT / MPH

XL125S 1982 (C) ENGLAND / MPH

XL125S 1982 (C) EUROPEAN DIRECT SALES / KPH

XL125S 1982 (C) FRANCE / KPH

XL125S 1982 (C) PARAGUAY / KPH

XL125S 1982 (C) SOUTH AFRICA / KPH

XL125S 1982 (C) SWITZERLAND / KPH

XL125S 1982 (C) AUSTRALIA / KPH

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1983 (D) SOUTH AFRICA / KPH

XL125S 1979 (Z) GENERAL EXPORT / KPH

XL125S 1979 (Z) GENERAL EXPORT / MPH

XL125S 1979 (Z) SOUTH AFRICA / KPH

XL125S 1979 (Z) AUSTRALIA / KPH

XL185S 1985 (F) CANADA

XL185S 1986 (G) CANADA

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1983 (D) GENERAL EXPORT / KPH

XL125S 1987 (H) FRANCE / KPH

XL125S 1987 (H) FRANCE / KPH

XL125S 1987 (H) FRANCE / KPH

XL125SLD 1990 (L) GENERAL EXPORT / KPH

XL125S 1980 (A) USA

XL125S 1981 (B) USA

XL125S 1982 (C) USA

XL185S 1980 (A) USA

XL185S 1981 (B) USA

XL185S 1982 (C) USA

XL185S 1983 (D) USA

XL125S 1984 (E) USA

‍

A good solid rad that came off 1987 Yamaha Rz 350 motorcycle.

All 4 intake manifolds (which can be sold separately), 17110-431-010 and 17120-431-010 from 1983 Honda Goldwing 1100 motorcycle.  They are in good solid condition.  Fitment is below

1979 Goldwing 1000

1980-83 Goldwing 1100

‍

‍

A coolant reservoir from 1983 Yamaha RZ350 vintage motorcycle.

‍

A good solid straight swingarm from a 1983 Yamaha RZ350 vintage motorcycle.  It has the cable guide on it.  Also available for sale separately is the swing arm bolt or pivot shaft bolt. It needs a good cleaning and some new paint if you want to make it look new again,

‍

The rad 17700-14110 and rad cap 17730-14300 from 1983 Suzuki RM 125 vintage motocross bike.  The rad cap can be sold separately but not until the rad has sold.  The rad will fit the 82-83 RM125

A good straight and solid frame from a 1983 Yamaha YZ125 vintage motocross bike.  It may fit the 1984 model as well and perhaps others.  The footpegs are being sold separately

‍

Two front brake rotors or brake discs 45120-MB9-950 from 1983 HOnda Goldwing 1100 motorcycle.  They are available separately at $80 ea.

‍

A cdi 5X2-85540-10-00 from 1983 Yamaha YZ80 vintage motocross bike.  The number on the part is TlA01-26A

5X2-10.  Fitment is below.

82-83 YZ60

83 YZ100.

‍

A real nice looking front fender from 1985 Suzuki GS400 motorcycle.  It should fot other years and probably the GS450 as well. It is a good solid fender. The mounts aren't perfect but they held the fender on the bike properly

‍

A good solid oil tank 4VP-F1751-00-00 from a 2003 Zuma 50 BWS 50 scooter. Also available is the oil cap ( 3BN-21770-01-00) and the oil tank breather hose 4VP-F1745-00-00 and the oil sub tank holder 4VP-F1734-00-00 and the oil sub tank 5PJ-F1733-00-00. The complete assembly is $35

The tank and hose and sub tank and sub tank holder will fit

03-09 YW50

The oil cap will fit those listed below

03-09 Zuma 50

1990 Snoscoot

02-03 Vino 50 YJ50

‍

A real nice looking, solid straight rear chrome fender 80100-405-000 from 1978 HOnda CB750K motorcycle.  It will fit the 1977 Hoda CB750K as well.  The chrome is quite clean on the viewable part of the fender.  The under side of it has surface rust on it where a quick sanding of it would remove a good portion of it.  It is just on the surface and not through at all.  Plus, it's in a spot where you don't notice it.

‍

A good solid front fender 35004-1233-6W from 1982 KDX175 dirtbike.  It needs a good cleaning as you can see.  The process to get rid of the oxidization was started and you can see how it brightens it up.  Just needs more elbow grease.  It will fit

80-82 KDX175

80-83, 87, 90-91 KX125

80 KX420

81 KDX420

82-84, 87, 92 KX250,

82-84 KDX 250

83 KDX200

84,89-90 KX500

‍

A good solid side cover 83700-443-6100 from a 1980 Honda Hawk . It is not broken and ready to be installed.  All tabs are secure.    It will fit from 1980-1982

‍

A good solid, straight front engine hanger from a 1983 HOnda XR200 vintage bike.

‍

A good solid rear fender 80101-MG9-000 from 1984 Honda Goldwing 1200 motorcycle.  Fitment is below

84-87 Goldwing 1200

‍

A good brake light or tail light assembly from 1987 Yamaha RZ350 motorcycle.  The lens and housing is good and the wiring is good.

‍

‍

A matched set of rear shocks with chrome springs from 1984 HOnda Magna 750 motorcycle, 52400-MB1-871 and 52500-MB1-871. Sold as a pair.

‍

A nice, straight side stand or kick stand from a 1983 Yamaha RZ350 vintage motorcycle.  Also available is the return spring

‍

The OEM ignition coil from 1983 Yamaha RZ350 motorcycle.  There are 2 available.  they will fit the Yamaha RD350 as well.

‍

A swingarm for sale that came off 1983 Yamaha RZ 350 motorcycle.  Also available are the wishbones and the chain adjusters

The master cylinder for sale 43015-1511 which includes the handlebar perch for it that came off 2001 Kawasaki Vulcan 800 Classic motorcycle.  Also available for sale separately is the brake calipre and brake hose 43095-1116 or brake line for sale.  

The master will fit Kawasaki Motorcycle 1993 Vulcan 88 - VN1500-A7

Kawasaki Motorcycle 1997 Vulcan 1500 - VN1500-A11

Kawasaki Motorcycle 1997 Vulcan 1500 L - VN1500-C4

Kawasaki Motorcycle 2000 Vulcan 800 - VN800-A6

Kawasaki Motorcycle 2002 Vulcan 800 - VN800-A8

Kawasaki Motorcycle 2001 Vulcan 500 LTD - EN500-C6

Kawasaki Motorcycle 2002 Vulcan 500 LTD - EN500-C7

Kawasaki Motorcycle 1998 Vulcan 800 Classic - VN800-B3

Kawasaki Motorcycle 1994 Vulcan 500 - EN500-A5

Kawasaki Motorcycle 1995 Vulcan 88 - VN1500-A9

Kawasaki Motorcycle 1996 Vulcan 500 LTD - EN500-C1

Kawasaki Motorcycle 1996 Vulcan 500 - EN500-A7

Kawasaki Motorcycle 1997 Vulcan 800 - VN800-A3

Kawasaki Motorcycle 1996 Vulcan 1500 - VN1500-A10

Kawasaki Motorcycle 1996 Vulcan 800 - VN800-A2

Kawasaki Motorcycle 1995 Vulcan 500 - EN500-A6

Kawasaki Motorcycle 1995 Vulcan 800 - VN800-A1

Kawasaki Motorcycle 2002 Vulcan 800 Classic - VN800-B7

Kawasaki Motorcycle 1992 Vulcan 88 - VN1500-A6

Kawasaki Motorcycle 1996 Vulcan 1500 L - VN1500-C3

Kawasaki Motorcycle 1993 Vulcan 500 - EN500-A4

Kawasaki Motorcycle 2003 Vulcan 800 - VN800-A9

Kawasaki Motorcycle 2003 Vulcan 500 LTD - EN500-C8

Kawasaki Motorcycle 2000 Vulcan 800 Classic - VN800-B5

Kawasaki Motorcycle 1998 Vulcan 800 - VN800-A4

Kawasaki Motorcycle 1999 Vulcan 1500 - VN1500-A13

Kawasaki Motorcycle 1999 Vulcan 500 LTD - EN500-C4

Kawasaki Motorcycle 1994 Vulcan 88 - VN1500-A8

Kawasaki Motorcycle 1999 Vulcan 800 - VN800-A5

Kawasaki Motorcycle 1999 Vulcan 800 Classic - VN800-B4

Kawasaki Motorcycle 1996 Vulcan 800 Classic - VN800-B1

Kawasaki Motorcycle 1992 Vulcan 500 - EN500-A3

Kawasaki Motorcycle 2000 Vulcan 500 LTD - EN500-C5

Kawasaki Motorcycle 2003 Vulcan 800 Classic - VN800-B8

Kawasaki Motorcycle 1998 Vulcan 1500 - VN1500-A12

Kawasaki Motorcycle 1998 Vulcan 500 LTD - EN500-C3

Kawasaki Motorcycle 2001 Vulcan 800 - VN800-A7

Kawasaki Motorcycle 2001 Vulcan 800 Classic - VN800-B6

Kawasaki Motorcycle 1997 Vulcan 800 Classic - VN800-B2

Kawasaki Motorcycle 1997 Vulcan 500 LTD

‍

The ignition coil 30500-KA2-000 from 1983 Honda XR200 bike.  It will fit these models for sure and perhaps others as well.

81-83 XR200R

81-82 XR250R

‍

The cdi 30400-437-023 or from 1983 Honda XR 200 bike. (selling it for $80).It should fit all these models listed below. I also have the base electric plate 50301-KA2-000 (it fits 81-83 XR200- selling it for $15).

79-81,84 XL125S

79-81,83 XL185S

79 XR185

80-83 XR200

81-82 CB125S

‍

A matched set of coils from 1983 Suzuki GS400 motorcycle. ($35 ea). They will fit the 82 and 83 for sure and I believe the GS450 as well.  Also for sale are the spark plug caps ($15 pr)

‍

A pair of nice straight floorboards or technically called the step holder assembly, both left and right 50740-MT8-000 and 50730-MT8-000.  (selling the pair of floorboards for $90)They will fit other years of the Honda Goldqing 1500.  Also available are the floorboard mounts or holders or technically called the pillion step holder cover which are chrome colored, 50817-MW5-000 and 50717-MW5-000.  The right one has a piece broke off it.  Take the 2 of these for the price of one. (45)

‍

The shift shaft or gear selector 41Y-18111-00-00 from 1982 Yamaha Seca 650 turbo motorcycle.  It will also fit the non turbo model of  1982 Seca 650.  It includes the linkage assembly as well such as the shift pedal arm 4BB-18112-00-00, the shift rod 16G-18115-00-00, the 2 dust covers 2H9-18154-00-00 and other hardware. (The complete assembly with all hardware and linkages is $80).

‍

The front brake disc or brake rotor 45120-392-000 from 1978 HOnda CB750K vintage motorcycle.   Fitment is below

76 Honda CB750F Super Sport

77 CB750A Automatic

77 CB750K

‍

I have the front wheel or rim for sale, including the wheel hub 44601-405-000,  a 19 inch chrome spoked wheel that came off my 1978 HOnda CB750K vintage motorcycle. (Selling for $180) I also have the front brake rotor or disc. ($80) The front rim 44701-300-013 or 44701-405-771 should fit

Honda Motorcycle 1978 CB750K A - 750 FOUR K

Honda Motorcycle 1977 CB750K A - 750 FOUR K

Honda Motorcycle Models with no year CB500 A

Honda Motorcycle Models with no year CB450K6 A

Honda Motorcycle Models with no year CB450K7 A

Honda Motorcycle Models with no year CB750K A

Honda Motorcycle Models with no year CB750K3 A

Honda Motorcycle Models with no year CB450K4 A

Honda Motorcycle Models with no year CB750K2 A

Honda Motorcycle Models with no year CB750K5 A

Honda Motorcycle Models with no year CB450K5 A FRONT WHEEL

Honda Motorcycle Models with no year CB500K1 A

Honda Motorcycle Models with no year CB500K2 A

Honda Motorcycle Models with no year CB750K1 A

Honda Motorcycle Models with no year CB750K4 A

Honda Motorcycle Models with no year CB450K3 A

Honda Motorcycle Models with no year CB550 A

Honda Motorcycle Models with no year CB550K1 A

Honda Motorcycle 1976 CB550K A - 550 FOUR

Honda Motorcycle 1976 CB500T A - 500 TWIN DOHC

Honda Motorcycle 1977 CB550K A - 550 FOUR K

Honda Motorcycle 1977 CB550F A - SUPER SPORT 550 FOUR

Honda Motorcycle 1976 CB750F A - 750 SUPER SPORT

Honda Motorcycle 1978 CB550K A - 550 FOUR K

Honda Motorcycle 1976 CB750K A - 750 FOUR

Honda Motorcycle 1976 CB550F A - SUPER SPORT 550 FOUR

‍

A starter for sale 21163-1108 for a 2000 Kawasaki KLR650.   It will fit the KLR650 from 1988-2018 and various years of the Tengai 650 listed below

Kawasaki Motorcycle 2014 KLR650

Kawasaki Motorcycle 2013 KLR650

Kawasaki Motorcycle 2016 KLR650

Kawasaki Motorcycle 2009 KLR650

Kawasaki Motorcycle 1991 Tengai

Kawasaki Motorcycle 2004 KLR650

Kawasaki Motorcycle 1989 KLR650

Kawasaki Motorcycle 1988 KLR650

Kawasaki Motorcycle 2017 KLR650

Kawasaki Motorcycle 2014 KLR650

Kawasaki Motorcycle 1991 KLR650

Kawasaki Motorcycle 1992 KLR650

Kawasaki Motorcycle 2018 KLR650

Kawasaki Motorcycle 2018 KLR650

Kawasaki Motorcycle 1995 KLR650 -

Kawasaki Motorcycle 1990 KLR650

Kawasaki Motorcycle 1993 KLR650

Kawasaki Motorcycle 1996 KLR650

Kawasaki Motorcycle 2000 KLR650

Kawasaki Motorcycle 1998 KLR650

Kawasaki Motorcycle 1994 KLR650

Kawasaki Motorcycle 1990 Tengai

Kawasaki Motorcycle 1987 KLR650

Kawasaki Motorcycle 2012 KLR650

Kawasaki Motorcycle 2017 KLR650

Kawasaki Motorcycle 2015 KLR650

Kawasaki Motorcycle 2016 KLR650

Kawasaki Motorcycle 2005 KLR650

Kawasaki Motorcycle 2007 KLR650

Kawasaki Motorcycle 2010 KLR650

Kawasaki Motorcycle 2018 KLR650

Kawasaki Motorcycle 2006 KLR650

Kawasaki Motorcycle 2011 KLR650

Kawasaki Motorcycle 2001 KLR650

Kawasaki Motorcycle 1999 KLR650

Kawasaki Motorcycle 1997 KLR650

Kawasaki Motorcycle 2008 KLR650

Kawasaki Motorcycle 2003 KLR650

‍

A never installed 21 inch quality dirtbike tire by Dunlop.  80/100-21 ready for your bike.

‍

A real nice speedo 37200-388-701 from a vintage 1977 Honda CJ360 motorcycle.  The chrome back is real nice, the sides are nice and the glass is clear.  There is one small puncture looking mark near the bottome but nothing is exposed at all.

‍

A very clean tach 37250-388-701 from a 1977 Honda CJ360 vintage motorcycle.  The chrome back is clean, the sides are clean, the face is clear and the wiring is intact.  I have other parts from the same bike for sale as well.

‍

A good straight 17 inch front rim with a knobby tire on it that has good tread but is weather checked that came off 1982 Suzuki RM80. It's being sold with the front hub or brake drum 54110-20403 including the break shoes 54400-20810  (it fits 82-85 RM80) I believe it fits

82-85 RM 80.

The rim size is 1.40 x 17. Also selling the wheel axle 54711-20401.($25). It will fit 82-95 RM 80.  It is for sale separately but only after the wheel is sold in case that buyer needs the axle as well.

‍

A matched set of side covers ( can be sold separately) with air cleaner elements 17211-388-000 and

17311-388-000 and the air cleaner cover

17215-388-000ZA and 17315-388-000ZA. The air cleaner cases

17214-388-000 and 17314-388-000 are there as well.  The air cleaner tubes  17353-387-300 and

17253-387-300 are available too.

‍

‍

A solid headlight pot ($45) 61301-333-013B from a 1977 Honda CJ360 vintage motorcycle.  Also for sale is the headlight mounting stay or mounting bracket 61311-388-000ZA.($55).

‍

A drive gear or speedo gear or technically called the meter gear case assembly 41078-011 from 1982 Kawasaki KDX 250 enduro bike.  Fitment is below

1979-1981  KL250

80,82,84,91 KDX250

1981 KDX420

83, 90 KDX200

‍

A good straight front 21 inch rim 41025-1056 with all spokes from a 1982 Kawasaki KDX250 dirtbike.

It has the front brake hub or brake drum 41034-4001 and the front brake panel 41035-1072. (Complete front wheel with spokes, tire and hub is $200) .The front axle ($30) is also for sale separately 41068-4001  

and the speedo gear or the meter gear case  41078-011. ($50)

‍

A NOS Cheng Shin dirtbike tire 90/90-16. Compatible with Honda Yamaha Kawasaki Suzuki and other brands.

An excellent brake disc 45251413941 from a HOnda CX650E motorcycle. There are 2 available.  It will fit various years of these models. (if you're not sure, send me a message)

CB750F

CB900F

CM400C

GL1100

CX400E

CX500E

CM450A

CB900C

‍

A good used speedo gear from a Honda CX650E motorcycle. Fitment is below

CA250T 1985 (F) Japan MC12-100

CB1100F 1983 (D) Italy

CMX250C Rebel 1985-87

CMX250CD RebelLTD 1986 (G) USA CALIFIORNIA

CX400E 1982 (C)

CX500E 1982 (C)

CX500T Turbo 1982 (C) Australia

CX500T Turbo 1982 (C) Belgium

CX500T Turbo 1982 (C) Canada

CX500T Turbo 1982 (C) England

CX500T Turbo 1982 (C) European Distric Sales

CX500T Turbo 1982 (C) France

CX500T Turbo 1982 (C) Germany

CX500T Turbo 1982 (C) Italy

CX500T Turbo 1982 (C) Netherlands

CX500T Turbo 1982 (C) South Africa

CX500T Turbo 1982 (C) Switzerland

CX500T Turbo 1982 1982 (C) USA

CX500TC 1982 (C)

CX650E 1983 (D) Australia

CX650E 1983 (D) Austria

CX650E 1983 (D) Belgium

CX650E 1983 (D) Canada

CX650E 1983 (D) England

CX650E 1983 (D) France

CX650E 1983 (D) European Direct Sales

CX650E 1983 (D) Germany

CX650E 1983 (D) Italy

CX650E 1983 (D) North Europe

CX650E 1983 (D) South Africa

CX650E 1983 (D) Sweden

CX650E 1983 (D) Switzerland

CX650E 1983 (D) Turbo 1983 (D) USA

‍

A good solid and straight engine mount or front engine hanger from a 1986 Honda XL200.  Pretty certain it will fit other years and perhaps the XR200 as well.

‍

The airbox including the air cleaner housing 17230-KA2-000 (fits 81-83 XR200), the air cleaner connecting tube 17253-KA2-000 (fits 81-83), air cleaner housing cover 17220-KA2-000 and the air cleaner element 17213-KA2-000 from a 1983 Honda XR 200 enduro bike. The price includes the airbox and the connecting tube.

‍

A good set of triple trees or the fork top bridge 53230-KA2-680, and the steering stem 53200-KA2-000 from a 1983 Honda XR 200 bike.  The steering stem  will fit the

1981-1983 XR200.  The top bridge will fit the 82 XR200 as well.

‍

The handlebars that came off  1982 Suzuki RM80 vintage motocross bike, part number 56110-20900-291. (selling the bars separately for $40). The clutch perch is available also or technically called the holder 57341-40002 and the clutch lever although the end knob is broke off, 57620-14300. (perch and lever included are $40).The bars  will fit those listed below.  The clutch perch will fit many years and models listed further below.

82-85 RM80

‍

‍

CLUTCH PERCH FITS

82-88, 91-95, 98-01 rm80

82 RM465

82-85 RM125, 87-91 RM125

83 RM500

84, 86, 89-90 RM250

89-93, 95-96 RMX250

00-04 DRZ400

05-09 DRZ125

03-06 RM85

‍

The complete rear shock 45014-1592 from 1998 Kawasaki Ninja ZX 600 motorcycle.(Selling it separately $125). Also for sale is the uni trak suspension arm 39007-1191 and the suspension tie rods 39111-1142 and Fitment is below for the shock. The suspension arm fits the same models but only up to and including 2003. I have the hardware as well 92150-1258 and 92002-1490 The fitment for the suspension tie rods is further below

96-97 ZX600 Ninja ZX-6

02 ZX600 Ninja ZX-6

03-05 ZZR 600

SUSPENSION TIE RODS

96-97, 02 ZX600 Ninja ZX-6

00 ZR-7

01-03 ZR-7S

03-05 ZZR 600

04-05 Z750

‍

For sale is the air distribution assembly 52730-MN5-003 and air hose 52660-MN5-003 and 52650-MN5-003 that controls the air ride in the rear suspension and the air pump 52700-MN5-003 and air hose 52650-MN5-003 from 1993 Honda Goldwing 1500A motorcycle. It includes the air pressure sensor assembly 35660-MN5-000, the levelling valve assembly 38500-MN5-000, the air sensor setting etc.  I can possibly sell the parts separately. Fitment is below

It will fit lots of years of the Goldwing 1500 and other model as well.

‍

This is a nice lower left fairing, shroud or cowl 64290-MAM-000ZL or 64290-MN5-000ZH that came off 1993 HOnda Goldwing 1500 Aspencade.  It is good and solid with one small crack in an unnoticeable area as shown in pic.  It does not affect the integrity of the fairing.  It also has the louver 64295-MN5-000  in it as well (the louver alone new it costs approx $140).  I also have the right lower fairing.  

This cowl should fit these models below.

1994 GL1500A Gold Wing Aspencade

1994 GL1500I Gold Wing Interstate

1998 GL1500SE Gold Wing Special Edition

1999 GL1500SE Gold Wing Special Edition

2000 GL1500SE Gold Wing Special Edition

‍

This is the lower right cowl or shroud or fairing 64280-MAM-000ZL or 64280-MN5-000ZH from a 1993 Honda Goldwing 1500 motorcycle.  It also has the louver in it 64285-MN5-000 .  The louver itself costs about $150 new at the dealer. (as pointed out in the pic, one part of the small louver is bentdown) The mounting tabs are all good on the fairing and the fairing has no breaks. One of the part numbers matches up with these models for fitment.

1994 Honda Goldwing Aspencade

1994 Honda Goldwing Interstate

‍

This is a reverse gear control unit from a 1994 Honda GL 1500SE. The part number is 36400-MT8-003. This part is used on the '90 1500 Goldwing, the '90-'00 SE, and the '91-'00 Aspencade.

‍

A good 16 inch rear wheel that came off 1993 Honda Goldwing 1500 motorcycle, 42650-MW5-305 or 42650-MW5-315.  It will fit other years.  Also available is  the final driven flange or hub 42630-MT8-305 or 42614-MT8-010 or 42614-MT8-000.  The brake rotor is not included.

The flange part numbers line up to fit 90-99 GL 1500

95-98, 01-02 ST1100

00-01 Valkyrie Tour

‍

The rad 17700-14110 and rad cap 17700-14110 from 1983 Suzuki RM 125 vintage motocross bike.  The rad cap can be sold separately but not until the rad has sold.  The rad will fit the

82-83 RM125

‍

A voltage regulator SH541-12 4.3 from a 1984 HOnda Goldwing 1200 motorcycle.  It will fit from 1984-1987. Also available is the mounting bracket.

‍

Both left 53150-MB0-670 and right 53100-MB0-670 handlebars from 1983 HOnda Sabre 750 motorcycle.  They are in good shape, one looks like it's taken a scrape at some point as pointed out in the pic but with grips on them, it won't be noticeable at all. They will also fit the

1982 V45 Sabre

‍

The spark unit 30400-461-155 and ignition control module or cdi 30400-MB9-951 from Honda Goldwing 1100 motorcycle.  The numbers on the boxes are MC-5194. The spark unit will fit

80-82 CB900C

81-82 CB900F

82 CB750C

81-82 CBX

82-83 GL1100

‍

The upper 44039-1040 bracket and steering stem  44037-1065 or triple trees or steering stem or triple clamps or upper and lower bracket< whatever you prefer to call them from 1982 Kawasaki KDX250 bike. The steering stem wiil also fit the

1980-81  KX420 amd the upper bracket will fit the 1980 KX 420.

‍

A set of triple trees that came off 1982 Suzuki RM 80 vintage motocross bike.  It includes the steering stem head 51311-20400-08C and the  steering head 51410-20400-08C .

‍

A pair of matched rear shocks with compression springs that came off 1985 HOnda XL185 enduro bike. fitment is below.

1981 XL125S (USA)1980 XL125S (USA)

1982 XL125S (USA)

1984 XL125 (USA)

1980 XL185 (USA)

1981 XL185 (USA)

1982 XL185 (USA)

1983 XL185 (CAN)

1983 XL185 (USA)

1984 XL185 (CAN)

‍